• 8983 2656 / 0917 541 0508
  • FAQS

POLYWALL® EPS SANDWICH PANEL

Polywall® is a lightweight, non-load bearing precast wall panel, composed of calcium silicate cement board with a mixture of cement, expanded polystyrene (EPS), and sand, bonded together using technical additives.

It reduces the five steps used in conventional frame construction into one simple system providing structure, insulation, vapor barriers, and firewalls.

OUR ADVANTAGES

Why switch to Polywall®?

Fast and Cost Efficient

POLYWALL® panels are completely fabricated off-site and need only to be installed on site. It cuts down the installation time from 4 to 2 months.

Light weight

50% lighter than traditional wall without plastering. The core material is filled with fire-rated Expanded Polystyrene (EPS).

Water and Moisture Resistant

Ficem boards and EPS is virtually inert, does not absorb moisture, and is decay-resistant. It will keep water from seeping through the panels.

Superior Thermal and Sound Insulation

Keeps your surrounding peaceful and cool even during the summer.

Durable

With a compressive strength of 400-700 PSI, our panel is ideal especially in high-rise buildings since the load is a major consideration in design and construction cost.

Fire Resistant

Fire proof rating of 4 hours against 1000°C. Perfectly meets the international environment protection criteria.

Energy Saving

POLYWALL® is reusable and recyclable. The wallboards can easily be dismantled and reused which is economical and eco-friendly.

Space Saving

Maximize usable area as no plastering needed. It comes in 100mm and 150mm thickness to fit your need.

Technical Specification

Description POLYWALL® 100mm POLYWALL® 150mm
Dimension 610mm X 2440mm 610mm X 2440mm
Weight 90kgs 125kgs
Compressive Strength 400-700 psi 400-700 psi
Surface Density 92.4 kg/m2 120 kg/m2
Anti-Pressure Strength 3.6Mpa 4.2Mpa
Moisture rate 3.70% 3.70%
Softening coefficient 1 0.81
Anti-bending damage load times over dead weight 3 times (No damage) 3 times (No damage)
Anti-impact performance No cross crack on panel No cross crack on panel
Single point hanging strength No break and cross crack on panel No break and cross crack on panel
Fire resistance 4 hours 4 hours
Heat Transfer 0.1478W/(m.k) 0.1478W/(m.k)
Density 650 kg/m3 650 kg/m3
Ceramic Tile Weight Capacity 15 kg/m2 15 kg/m2

Uses and Applications

Polywall® can be used as a non-load bearing interior & exterior wall panels, partition wall panels, floor panels, roof panels.

  • Residential Houses
  • Warehouses
  • Schools
  • Residential Buildings
  • Commercial Establishments
  • Demising Walls
  • Fences/ Perimeter Walls
  • Mass housing
  • Factory Buildings

Polywall® is an energy-efficient wall partition with an insulation composition. These save cooling costs as well as reduce HAVC sizing by 30 to 40%, providing a comfortable surrounding reduced temperature variations, reduce noise, and better indoor air quality.

Photos

Got a project?

Contact our sales team for a free quotation and site visit.

We use cookies to give you the best experience.